Before: Aerial View
Here's what David's roof looked like before the renovation. Those aging three-tab shingles had reached the end of their lifespan. Swipe through to see the dramatic transformation!
Before: Oxidized Chimney Flashing
The chimney flashing was lifting and heavily oxidized, which not only looked bad but also left the area vulnerable to leaks. Time to correct that with proper materials and craftsmanship.
The Teardown Begins
The crew began by removing all of the old shingles. Once removed, the plywood decking - the structural base of the roof - was fully exposed for inspection.
New Plywood Is Installed
Any damaged plywood was taken out to make room for brand-new, strong CDX sheets.
Ice-and-Water Shield Is Installed]
Each new sheet of plywood was numbered for accurate reporting back to the homeowner. SealoronXT ice-and-water shield was then applied from the eaves up six feet, protecting the roof's most vulnerable areas.
Underlayment Is Completed
Velora One synthetic underlayment was installed over the remaining decking, forming a breathable yet highly water-resistant protective layer.
New Shingles Are Installed
Time for the new shingles! David selected the stunning Granite Black from our IKO Dynasty collection. These Impact-3 rated architectural shingles are proudly backed by our 50-year Brown Roofing warranty.
New Flashing on the Chimney
Brand-new chimney flashing was installed to create a fully watertight seal at the chimney base. A major improvement from what was there before!
After: Aerial View
After final touches and a thorough cleanup, David's new roof is complete: strong, sleek, and looking absolutely phenomenal.