Existing Roof Before Replacement - Front View
This ground-level view shows Scott's home in Durham, CT, before the roof replacement began. The aging asphalt shingles show visible signs of weathering, making it time for an updated roofing system.
Existing Three-Tab Shingles - Rear View
A view from the back of the home provides a closer look at the existing three-tab asphalt shingles. Their distinct rectangular pattern and weathered appearance contrast with the architectural shingles selected for the replacement.
Roof Tear-Off and Property Protection
Our crew began removing the existing roofing materials while positioning large protective tarps around the work area. These tarps help collect falling debris and protect the surrounding property throughout the tear-off process.
Inspecting and Removing Damaged Roof Decking
With the old shingles removed, the underlying plywood roof decking was exposed for inspection. Our team identified and removed deteriorated sections to prepare the roof for new, structurally sound decking.
New CDX Plywood and Ice and Water Shield
Fresh CDX plywood was installed in place of the damaged decking, creating a solid foundation for the new roofing materials. Our crew also began applying ice and water shield, which would extend six feet up from the eaves and cover other vulnerable areas of the roof.
Taping the Roof Decking Seams
Our team applied seam tape along the joints between the plywood decking sheets as part of the roof preparation process. This step helps seal the seams and supports compliance with applicable roofing requirements before the remaining materials are installed.
VELORA ONE Synthetic Underlayment Installation
VELORA ONE synthetic underlayment was installed across the remaining roof decking above the ice and water shield. This additional protective layer helps manage moisture beneath the shingles, with drip edge and rake metal installed as part of the roof preparation.
Installing IKO Dynasty Frostone Gray Shingles
With the protective layers and perimeter metal in place, our crew began installing IKO Dynasty architectural shingles in Frostone Gray. The new shingles provide a dimensional, updated appearance that complements Scott's home.
Ridge Vent Installation
After the main shingle installation was completed, our team began installing ridge ventilation along the roof's peaks. Ridge vents allow warm, humid air to escape from the attic when paired with adequate intake ventilation, helping support proper airflow through the roofing system.
Finished Ridge Caps and Perma-Boot
The completed roof ridges feature neatly installed ridge cap shingles, providing a finished appearance along the roof's peaks. A Perma-Boot is also visible around a plumbing vent pipe, providing additional protection at this roof penetration.
Chimney Flashing Details
This photo highlights the new flashing installed where the chimney meets the surrounding roof. Properly installed chimney flashing helps direct water away from this vulnerable intersection and reduces the risk of moisture intrusion.
Completed Roof Replacement in Durham, CT
The finished roof showcases IKO Dynasty architectural shingles in Frostone Gray, giving Scott's home a clean, refreshed appearance. With updated decking, protective underlayment, ventilation, and flashing details, the completed project brings together the essential components of a new roofing system.
.png){kind=icon}
