Before the Transformation
Here is a look at Greg and Gina's Stratford home before their roof replacement began. While the existing roof appeared relatively intact from the front of the property, a closer inspection revealed issues that showed the roofing system was ready for attention.
Evidence of an Active Leak
During his inspection, Austin entered the attic and found clear evidence of water intrusion, including a bucket positioned beneath an active drip. Examining the attic can provide valuable insight into roofing problems that may not be obvious from the exterior of the home.
Previous Repairs Around the Chimney
A closer look at the chimney revealed a heavy application of roofing cement around its base, indicating previous attempts to seal this vulnerable area. While roofing cement can sometimes serve as a temporary repair, properly installed flashing provides a more dependable long-term method of directing water away from the chimney.
Removing the Old Roof
With large protective tarps positioned around the property, our crew began removing the existing shingles and roofing materials. These tarps help contain falling debris while protecting the siding, windows, landscaping, and surrounding areas throughout the tear-off process.
Evaluating the Plank Decking
Once the existing roofing materials were removed, the home's plank-style roof decking was exposed. Our crew carefully inspected the planks and removed damaged or deteriorated sections that could no longer provide a reliable foundation for the new roofing system.
Repairing the Roof Deck
New CDX plywood was precisely cut and installed wherever compromised sections of decking had been removed. These repairs restore a strong, stable foundation and prepare the roof for the protective materials and shingles that follow.
Installing a New Skylight
A new Velux skylight was installed to replace the existing unit as part of the roofing project. Replacing the skylight while the surrounding roofing materials are already being renewed allows it to be properly integrated into the new roofing system while continuing to bring natural light into the home.
Adding Waterproof Protection
Ice and water shield was installed six feet up from the eaves and throughout the roof valleys. These vulnerable areas experience significant water flow and are especially susceptible to moisture intrusion, making the self-adhering waterproof membrane an important layer of protection beneath the finished roof.
Installing Weatherwood Shingles
With the roof properly prepared, installation began on Greg and Gina's new IKO Dynasty shingles in Weatherwood. The dimensional blend provides a warm, classic appearance while completing the home's updated roofing system.
Updating the Bay Window Roof
The bay window received the same careful roofing treatment as the main house. New protective materials and matching Weatherwood shingles create a cohesive finished appearance while providing this smaller roof section with dependable protection of its own.
Completing the Roof Ridges
As installation neared completion, our crew finished the roof peaks with ridge ventilation and coordinating ridge cap shingles. The ridge vents provide an outlet for warm, humid attic air, while the cap shingles create a clean and finished appearance along the roofline.
Properly Flashing the Chimney
New lead flashing was carefully installed and sealed around the chimney, replacing the heavily patched transition seen before the project began. Proper flashing creates a durable, watertight connection between the chimney and surrounding roofing materials, helping direct water safely away from this vulnerable area.
The Finished Transformation
With the project complete, Greg and Gina's Stratford home now has a fully updated roofing system featuring Weatherwood shingles, new decking where needed, improved chimney flashing, ventilation, and a new skylight. Most importantly, the home is equipped with renewed protection against the water intrusion that originally brought Greg and Gina to Brown Roofing. Brown Won't Let You Down!
.png){kind=icon}
