Before
Here is a look at Dike and Sonia's Shelton home before the roof replacement. Built in 1938, this Cape features several different roof sections that would all receive careful attention throughout the upcoming transformation.
Small Spot, Potentially Bigger Problem
Dike and Sonia initially contacted Brown Roofing after noticing this small water spot on the ceiling beneath their addition. Even minor signs of water intrusion can indicate a larger roofing issue, which is why addressing leaks early can help prevent more extensive damage over time.
Attic Inspection
Inspector Brandon continued the evaluation from inside the attic, where he found signs of moisture damage and deterioration in the plywood roof decking. Around this roofing nail, the compromised wood had begun to split and separate, providing further evidence that moisture had affected the underlying structure.
Tear-Off Begins
With the property prepared for installation, our crew began stripping away the existing shingles and roofing materials. Working down from the ridge, the team carefully removes the old system to expose the plywood decking underneath.
Water-Damaged Decking
Once the shingles were removed, the extent of the moisture damage became much easier to see. Large areas of the existing plywood had become heavily discolored and deteriorated, reinforcing the importance of inspecting the entire roof deck during replacement.
New Decking
New CDX plywood was installed to create a solid, dependable roof deck for the new roofing system. Each sheet is numbered as it is installed, allowing our team to accurately document and track the amount of decking replaced throughout the project.
Seam Tape + Ice & Water Shield
Next, the plywood seams were taped and ice and water shield was applied to the roof's most vulnerable areas. This self-adhering waterproof membrane provides an additional layer of protection against water intrusion from ice damming, wind-driven rain, and melting snow.
Underlayment + Metal
Synthetic underlayment was installed across the remaining roof deck to provide another water-resistant layer beneath the shingles. New drip edge and rake metal were also installed along the roof perimeter to help direct water away from the decking and fascia.
Summit Gray
With the roof properly prepared, installation of the new IKO Dynasty shingles in Summit Gray began. The dimensional blend of gray tones gives Dike and Sonia's home a clean, updated appearance while complementing the character of the original Cape.
SBS Section
The low-slope portion of the home requires a different roofing system than the steeper sections because traditional shingles are not designed for this type of application. Here, the base layer of a two-layer SBS modified bitumen system has been installed. Once completed with its cap sheet, this system provides durable waterproofing designed specifically for low-slope roof areas.
SBS Cap + Finishing Touches
At this stage, the Summit Gray shingles are in place and the cap sheet has been applied over the SBS base layer, completing the low-slope roofing system. With the major installation work finished, our crew moves on to the final details and ensures each section of the roof is properly completed.
Chimney Flashing
Here is a closer look at the clean new lead flashing installed around one of the home's chimneys. Proper chimney flashing creates a watertight transition between the masonry and roofing materials, helping protect one of the roof's most vulnerable areas from water intrusion.
The Finished Look
And here is the completed transformation from above! From the Summit Gray shingles and low-slope SBS roofing to the new chimney flashing, pipe flashing, and ridge ventilation, each section has been carefully finished to create a cohesive and dependable roofing system. This aerial view showcases the many rooflines and architectural details of Dike and Sonia's home while highlighting just how much work went into the finished project. Brown Won't Let You Down!
.png){kind=icon}
