Before: Worn Shingles
Here is a look at Bruce's roof before the transformation began. At approximately 35-40 years old, the existing three-tab shingles were showing significant signs of age and deterioration. With leaks and ice damming having caused problems in the past, it was time to give this home a complete new roofing system.
Before: Moss & Lichen
This section of the roof shows just how much the existing shingles had deteriorated over the years. Heavy moss and lichen growth had developed across the surface, while the shingles themselves showed considerable wear. Conditions like these are common on older roofing, particularly in areas that receive less direct sunlight and remain damp for longer periods.
Before: Rafters and Old Wood
During his inspection, Josh accessed the attic to evaluate the roof from inside the home. Visible staining and deterioration on the roof sheathing and framing showed evidence of previous water intrusion. Examining the attic can provide valuable information about leaks and moisture issues that may not be apparent from the exterior alone.
The Roof Tear-Off
The first major step of the roof replacement is removing the existing roofing materials down to the roof deck. Before tear-off begins, our crew carefully hangs large protective tarps around the home to help shield the siding, landscaping, and surrounding property from falling debris. With everything protected, the old shingles can safely come off.
Roof Deck Inspection
With the old roofing materials removed, the underlying roof sheathing is completely exposed. Our crew carefully examines the decking for deterioration, rot, and other signs of moisture damage that could compromise the new roofing system. Any damaged sections are identified and removed before installation continues.
New Plywood Is Installed
New plywood is installed wherever damaged or deteriorated sheathing has been removed, providing a strong and stable foundation for the new roof. Each replacement sheet is numbered, allowing our crew to accurately document and track the additional materials used during the project. Once the decking is sound, the roof is ready for its protective layers.
Seams Are Taped and Ice-and-Water Shield Is Installed
With the roof deck prepared, the plywood seams are taped before ice-and-water shield is installed along vulnerable areas of the roof. This waterproof membrane extends six feet up from the eaves and is also installed throughout the valleys, providing additional protection in areas especially susceptible to water and ice intrusion. These protective measures help create a durable defense beneath the finished shingles.
Underlayment Is Completed
The remaining roof deck is covered with synthetic underlayment, creating an additional water-resistant layer beneath the shingles while allowing the roofing system to breathe. With the protective layers in place, our crew begins installing Bruce's new IKO Dynasty shingles in Granite Black. The rich, dark color gives the home a clean and timeless appearance.
Finishing Up
The new shingles are in place, and our crew completes the final details of the roofing system. Cap shingles are carefully installed along the ridge vent, providing a finished appearance while allowing the attic ventilation system to function properly. With these final touches complete, the transformation is nearly finished.
The Roof Is Complete
Bruce's new roof is complete! The aging and deteriorated three-tab shingles have been replaced with a durable new roofing system finished in IKO Dynasty Granite Black. After decades of wear and previous issues with leaks and ice damming, Bruce can now enjoy the peace of mind that comes with a roof built to protect his home for years to come.
.png){kind=icon}
